SuperOx Probe

SuperOx probe
Download the PDF

Designed for: High Temperature applications

Oxygen sensor for combustion control in re-heat furnaces, boilers and incinerators.

This in-situ oxygen sensor measures "%" oxygen concentrations directly in the combustion area of high temperature furnaces, boilers and incinerators. They are intrinsically safe, generating a very low millivolt output based on the oxygen content of the atmosphere.

Applications:
  • Glass Melting - Glass Furnace / Ceramic Kilns Exhaust Stacks
  • Steel Reheat Furnaces
  • Incinerators
  • Boilers
  • Ceramic Kilns
Features:
  • Available in a number of standard lengths - 18"(457mm), 26"(660mm), 30"(762mm), and 36" (915 mm)
  • Available in both alumina and silicon carbide outer sheaths
  • Rapidly replacing older/outdated, non-current patented, non-rebuildable in situ oxygen sensors
  • Field performance can be collaborated using external "verification" port
  • "B", "S", and "R" thermocouples are available
  • Temperature Range: 649-1550°C
  • Cooling air maintains positive pressure to ensure the integrity of the electrical connections in HARSH environments
  • Outer electrode is not "painted" on the zirconia electrolyte, eliminating the antiquated "boot" design
  • Years of application experience maximizes sensor life and performance in high-slag, turbulent environments

Applications

Steel Reheat Furnace

SSi has designed, developed and tested an in situ, high temperature oxygen sensor ideally suited for the typical steel reheat furnace. Measuring excess oxygen allows the control system to maintain an optimum level of oxygen, enough for combustion, reducing scale build-up and limiting the development of NOx.

SuperOX offers:

  • Fuel Savings
  • Scale Control
  • Limits NOx Development
SuperOx probe

Glass Melting

Features:
  • 24/7 monitoring of combustion stack oxygen
  • Interface with existing combustion control system
  • Low maintenance, NO calibration
  • Probe verification
  • Oxygen sensor is re-buildable
  • Optional "sample" dryer
  • Optional "sample" pump
  • Optional interface with ETHERNET
  • Optional interface with 4-20mA Damper Control
What does this do for you?
  • Gives you an input to control your air-fuel ratio
  • It will improve the QUALITY of the product
  • It will reduce maintenance costs
  • It will allow product consistency