Ideal for temper/draw applications where analog timers are used- Logic inputs used with push buttons for very easy-to-use interface
- Automatically download set point and time from SuperDATA
- Universal Temperature Control
- Auto-tuning
- Adaptive tuning
- Communications
- Modbus
- Profibus
Input Logic
- 3 digital inputs
- Alarms
- Deviation
- Band threshold
- Absolute threshold
- 1/8 DIN – 48×96 mm
- 6 Outputs
- 4 Relay
- 2 Analog
- Update time : 50 ms
Timer Options
Stand alone timer (count down)- Ability to pause and change value at anytime
- Ability to reset at anytime
- Timer tied to an optional logic input to start time
- Timer complete tied internally to a logic and/or relay output for cycle complete
Example 1 – Timer is manually started when load is put in to furnace and does not stop counting down until time is expired.- Example 2 – Timer Starts when Process Variable comes within temperature band and does not stop until time is expired.
- Example 3 – Timer Starts when Process Variable comes within a predefined temperature band of Setpoint. Timer pauses the count-down when Process Variable falls outside of band, and continues counting down again when the Process Variable falls back inside of band.